Alicia Is Making A Patchwork Quilt. The Pattern Is A Tessellationmade Up Of Fabric Pieces Shaped Like (2024)

(a)2 sin 14° cos 14° = sin 28°

(b)2 sin 30° cos 36° = sin 72°

(c)2 tan 7° 1 - tan 7° = 2tan 14°

(d)2 tan 7° 1-tan2 7° = 2tan 14°

Trigonometric ratios of double angles (2θ) are expressed in terms of trigonometric ratios of single angles (θ) using double angle formulae. The Pythagorean identities are used to create certain alternative formulas, while the double angle formulas are special cases of (and are thus derived from) the sum formulas of trigonometry.

(a) Using the Double Angle Formula for sin 2θ:

2 sin 14° cos 14° = sin 28°

(b) Using the Double Angle Formula for cos 2θ:

2 sin 30° cos 36° = sin 72°

(c) Using the Double Angle Formula for tan 2θ:

2 tan 7° 1 - tan 7° = 2tan 14°

(d) Using the Double Angle Formula for tan 2θ:

2 tan 7° 1-tan2 7° = 2tan 14°

To learn more about half angle formula: https://brainly.com/question/14308845

#SPJ11

Answer:

x=20

Step-by-step explanation: your welcome

2 x + 140 = 180

-140 l -140

2 x l 40

2x l 2x

x = 20

The system is stable.

Learn more about Stability: https://brainly.com/question/30424770

#SPJ11

Assuming the distribution of ages is normally distributed, the percentage of the drivers that are between the ages 17 and 56 is 69.49%.

According to the Federal Highway Administration 2003 highway statistics, the distribution of ages for licensed drivers has a mean of 44.5 years and a standard deviation of 17.1 years.

To find the percentage of drivers between the ages of 17 and 56, we'll use the normal distribution properties.

Learn more about percentage:

https://brainly.com/question/24877689

#SPJ11

Reliable sources are what make your research paper solid and strong.

Reliable sources are crucial in ensuring that your research paper is solid and strong. It is important to conduct thorough research and choose only the most credible sources to support your arguments and ideas. By utilizing high-quality sources, you can add depth and validity to your work, ultimately leading to a more impactful and successful paper.
A reliable source is America's Sunday morning talk show on CNN from 1992 to 2022, focusing on analysis and commentary on American media. It airs at CNN's WarnerMedia Studios in New York City from 11:00 AM to 12:00 PM ET. He also broadcasts internationally on CNN International.

This program was originally designed to analyze media coverage of the Persian Gulf War, but has since focused on media coverage of the Valerie Prime incident, the Iraq war, Mark Felt's trip as the Deep Throat, and many other things and internal information. On August 18, 2022, CNN canceled the show and host Brian Settler announced he was leaving the network. The final episode will air on August 21, 2022.

Learn more about Solid:

brainly.com/question/12649605

#SPJ11

The sum of the series ∑n=1[infinity]6n(n + 2) is ∞.

To find the sum of the series ∑n=1[infinity]6n(n + 2), we can use the formula for the sum of a series of the form ∑n=1[infinity]an = ∞∑n=1(an − an−1), where a0 = 0.

First, we need to find an expression for the nth term of the series, an. Using the formula for the product of two consecutives integers, we can write:

an = 6n(n + 2) = 6n^2 + 12n

Next, we can compute the difference between consecutive terms:

an - an-1 = [6n^2 + 12n] - [6(n-1)^2 + 12(n-1)]

= 6n^2 + 12n - 6(n^2 - 2n + 1) - 12(n - 1)

= 6n^2 + 12n - 6n^2 + 12n - 6 - 12n + 12

= 6

Therefore, we have:

∑n=1[infinity]6n(n + 2) = ∞∑n=1(6) = ∞

The series diverges to infinity.

Learn more about integers at:

brainly.com/question/15276410

#SPJ4

There are no values less than 30 or greater than 70 in the dataset, there are no outliers for the age-group 40 years to 50 years using this method.

To identify outliers for the age-group 40 years to 50 years, we need to use a statistical method called the interquartile range (IQR). The IQR is the difference between the third quartile (Q3) and the first quartile (Q1). Any data point that is more than 1.5 times the IQR below Q1 or above Q3 is considered an outlier.
Assuming we have a dataset for the age-group 40 years to 50 years, we first need to find Q1, Q3, and the IQR. Let's say the dataset is {42, 44, 45, 47, 48, 50, 52, 55, 58, 60}. To find Q1, we need to find the median of the lower half of the dataset. In this case, the lower half is {42, 44, 45, 47, 48}. The median of this set is 45. To find Q3, we need to find the median of the upper half of the dataset. In this case, the upper half is {50, 52, 55, 58, 60}. The median of this set is 55. Therefore, Q1 = 45 and Q3 = 55. The IQR is Q3 - Q1 = 55 - 45 = 10.
Now, we can identify outliers. Any data point that is more than 1.5 times the IQR below Q1 or above Q3 is considered an outlier. In this case, any value less than 30 or greater than 70 would be considered an outlier. Since there are no values less than 30 or greater than 70 in the dataset, there are no outliers for the age-group 40 years to 50 years using this method.

for more questions on outliers

https://brainly.com/question/3631910

#SPJ11

According to the unitary method, O is taller than two people and shorter than three people in the group.

According to the given information, M is taller than only one person, P.

This means that M is the second shortest person in the group, and P is the shortest. O, on the other hand, is taller than both P and M, making O the third tallest person in the group.

Therefore, we can conclude that L, N, and O are taller than M and P.

Furthermore, O is smaller than L and N, but not smaller than M. This tells us that O is the third tallest person in the group, with only L and N being taller.

Thus, we can deduce that O is taller than only two people, M and P, and shorter than three people, L, N, and O.

To know more about unitary method here

https://brainly.com/question/28276953

#SPJ4

The margin of error from the smaller sample will be about 3 times the margin of error from the larger sample.

How to find margin of error?

The margin of error in a one-sample z interval for a proportion depends on three factors: the sample size (n), the sample proportion, and the level of confidence [tex](z\alpha/2)[/tex]. The formula for the margin of error is:

Assuming the sample proportion is the same in each sample, the only difference between the margins of error will be due to the difference in sample sizes.

The margin of error is inversely proportional to the square root of the sample size, meaning that as the sample size increases, the margin of error decreases. Therefore, if the larger sample size is n = 900 and the smaller sample size is n = 100, the margin of error from the smaller sample will be about √9 times larger than the margin of error from the larger sample, or approximately 3 times larger. In other words, the margin of error from the smaller sample will be about 3 times the margin of error from the larger sample.

To know more about Hypothesis test visit:

brainly.com/question/28760793

#SPJ1

The value of the missing figure of the sides of the parallelogram would be = 4.2

What is parallelogram?

Parallelogram is defined as the quadrilateral that has opposite sides equal in length, and the opposite angles are equal in measure.

The formula for perimeter = 2(a+b)

The perimeter = 25

a = y

b = 4y

The value of y;

25 = 2(y+2y)

25 = 2y + 4y

25 = 6y

y = 25/6

y = 4.2

Learn more about perimeter here:

https://brainly.com/question/24571594

#SPJ1

The conversion of radians to degree and vice versa is 1. -13π /12 = -195° 2. 480° = 8π/3. 3. 510 = 5π/6. 4. 330 = -π/3 5. - π/4 = -45 6. - 7π/3 = 420°.

What is a unit circle?

A circle with radius 1 that is located at the origin of a coordinate plane is known as the unit circle. Trigonometric functions and their connections to angles in both degrees and radians are shown by circles.

By placing the angle on the unit circle in standard position (with its vertex at the origin), we can use it to convert between degrees and radians by measuring the length of the arc on the circle that corresponds to the angle. After that, this length is represented as a multiple of either to convert from degrees to radians or to convert from radians to degrees.

1. Convert -13π /12 from radians to degrees, we multiply by 180/π:

-13π /12 * 180/π = -195°

2. To convert 480° from degrees to radians, we multiply by π/180:

480° * π/180 = 8π/3

3. To convert 510° from degrees to radians, multiply by π/180:

Subtract 360° to get an equivalent angle between 0 and 360°

(510° - 360°) * π/180 = 5π/6

4. To convert 330° from degrees to radians:

Subtract 360° to get an equivalent angle between 0 and 360°.

(330° - 360°) * π/180 = -π/3

5. Convert - π/4 from radians to degrees, we multiply by 180/π:

π/4 * 180/π = -45°

6. Convert - 7π/3 from radians to degrees, we multiply by 180/π:

-7π /3 * 180/π = -420°

Learn more about unit circle here:

https://brainly.com/question/11987349

#SPJ1

Carrie earned 2 Social Security credits in 2009.

What is simple interest?

Most of the time, we don't demand a fee when lending money to individuals we know, but in the actual world, neither borrowing nor lending money happens for free. For lending us money, banks and other financial organisations charge a fee. On the other hand, if we lend them money and put it in a bank account, they pay us a charge. Simple interest is the name for this cost.

To determine the number of Social Security credits earned in a year, we need to know the total amount of earnings in that year.

Since Carrie earned $231 each month in 2009, her total earnings for the year would be:

Total earnings = Monthly earnings x 12 months

Total earnings = $231 x 12

Total earnings = $2,772

To earn one Social Security credit in 2009, an individual needed to earn $1,090 in covered earnings. Therefore, to determine the number of Social Security credits earned by Carrie in 2009, we can divide her total earnings by the amount needed to earn one credit:

Number of credits earned = Total earnings / Earnings needed per credit

Number of credits earned = $2,772 / $1,090

Number of credits earned ≈ 2.54

Since we cannot earn a fraction of a credit, we can round this number down to 2. Therefore, Carrie earned 2 Social Security credits in 2009.

Learn more about simple interest on:

https://brainly.com/question/1173061

#SPJ1

The lim t→[infinity] arctan(8t) is equal to π/2 , lim t→[infinity] e - 7t is equal to negative infinity (that is, -∞) and lim t→[infinity] In(t) t is equal to infinity (that is, ∞).

For finding limit of [tex]\lim_{t \to \infty} arctan(8t)[/tex]

Let x=8t

We know as x tends to π/2 , then tan(x) tends to infinity.

Arctan(x) is inverse function of tan(x) function.

Therefore, as x tends to infinity, arctan(x) tends to π/2

That is,

[tex]\lim_{x \to \infty} arctan(x)[/tex] = π/2

Thus, [tex]\lim_{t \to \infty} arctan(8t)[/tex] = π/2

Since, [tex]{x \to \infty}[/tex] ⇒ [tex]{x/8 \to \infty}[/tex] ⇒[tex]{t \to \infty}[/tex] ⇒[tex]{8t \to \infty}[/tex]

For finding limit of [tex]\lim_{t \to \infty} e -7t[/tex]

As t tends to infinity, -7t tends to negative infinity.

Thus, e -7t tends to negative infinity as t tends to infinity.

That is, [tex]\lim_{t \to \infty} e -7t[/tex] = -∞

For finding limit of [tex]\lim_{t \to \infty} In(t) t[/tex]

As t tends to infinity, In(t) tends to infinity.

Thus, [tex]\lim_{t \to \infty} In(t) t[/tex] = ∞

To know more about limits here

https://brainly.com/question/31307072

#SPJ4

sin(3t) + sin(4t) = 2sin(7t/2)cos(-t/2) is a product of two trigonometric functions of different frequencies.

To write sin(3t) + sin(4t) as a product of two trigonometric functions of different frequencies,

To practice more questions about trigonometric function:

https://brainly.com/question/25618616

#SPJ11

The function represent graph is option G.

What is function?

A mathematical phrase, rule, or law that establishes the link between an independent variable and a dependent variable (the dependent variable). In mathematics, functions exist everywhere, and they are crucial for constructing physical links in the sciences.

Here the given function is ,

f(x) = 300x+2000

Where x = number of cars sold.

Now put x= 1 then,

f(x) = 300*1+2000 = $2300

Now put x = 2 then,

f(x) = 600+2000 = $2600

Hence the function represent graph is option G.

To learn more about function refer the below link

https://brainly.com/question/11624077

#SPJ1

In contrast to quantitative research, sampling may not always produce the same results in qualitative data analysis. The analysis will depend on the more complicated themes.

The researcher must seek for saturation in order to set a sample size restriction. The ideal in qualitative research is saturation. It serves as a tool to make sure sufficient, high-quality data are gathered to support the investigation.

Quantitative research is a method of gathering and analyzing data that uses numerical and statistical techniques. It is a systematic and objective approach that involves the collection of numerical data through surveys, experiments, or other forms of measurement, which is then analyzed using statistical tools. The goal of quantitative research is to generate and test theories, hypotheses, and models that can be generalized to a larger population.

Quantitative research often involves the use of large samples, which allow researchers to draw statistically significant conclusions about the population being studied. It also involves the use of standardized measures and data collection methods to ensure that the data collected is reliable and valid. Quantitative research is widely used in fields such as social sciences, education, psychology, and market research to study a variety of phenomena, including attitudes, behaviors, opinions, and trends.

To learn more about Quantitative research visit here:

brainly.com/question/30472457

#SPJ4

Complete Question:-

Which statement about sample size in qualitative research is true?

A. Sampling for qualitative studies should stop before information becomes redundant.

B. If the quality of data being collected is exceptionally good, a smaller sample may suffice than when data are of mediocre quality.

C. New researchers who have a fresh eye on phenomena can rely on smaller samples than more experienced researchers.

D. Typical case sampling requires more participants than maximum variation sampling.

False. A significant P-value from a chi-square test indicates that there is a statistically significant difference between the observed and expected values.

However, it does not indicate the number of significant differences or which specific categories are contributing to the overall difference.

For example, if a chi-square test is used to compare the distribution of hair color in two populations and the P-value is significant, it means that there is a difference in hair color distribution between the two populations. However, it does not tell us which hair colors are different or how many differences there are.

To determine the specific differences between categories, posthoc tests or further analysis may be needed. Therefore, it is incorrect to assume that a significant P-value from a chi-square test implies only one significant difference between the parameters for the categories.

To learn more about “chi-square” refer to the https://brainly.com/question/4543358

#SPJ11

Width of the confidence interval if the changes below were made:

The sample size is changed from 110 to 50 (30 females, 20 males) - width would increase.The number of bootstrap samples used is changed from 5,000 to 9,000 - width would decrease.The confidence level is changed from 99% to 95% - width would decrease.The sample difference in means is changed from 12.87 to 13.09 - width would say about the same.

If the number of sample decreases, standard error increases, margin of error increases, so width would increase, If the number of sample increases, standard error decreases, margin of error decreases, so width would decrease, if the level of confidence is decreased, then z or t value decreases, the width would decrease

The sample difference in means does not affect the width of confidence interval, so width would say about the same.

Learn more about confidence interval:

https://brainly.com/question/14748619

#SPJ4

(a) The intervals where the function is increasing or decreasing is (-∞, -√15) U (0, √15) and (-√15, 0) U (√15, ∞).

(b) The intervals where the function is concave upward and downwards is

(-∞, -√5) U (√5, ∞) and (-√5, √5)

(c) The graph of the function is illustrated below.

(a) The first step in analyzing the behavior of the function is to find the intervals where it is increasing or decreasing. This is done by finding the derivative of the function, which represents the rate of change of the function. In this case, the derivative of the function is:

f'(x) = 4x³ - 60x

To find the intervals where the function is increasing or decreasing, we need to find the critical points of the function. These are the points where the derivative equals zero or does not exist. Setting f'(x) = 0, we get:

4x³ - 60x = 0

4x(x² - 15) = 0

x = 0 or x = ±√15

Intervals where the function is increasing:

(-∞, -√15) U (0, √15)

Intervals where the function is decreasing:

(-√15, 0) U (√15, ∞)

To determine any relative extrema of the function, we look at the sign of the derivative on either side of each critical point.

Relative maximum: (±√15, 144)

Relative minimum: (0, 189)

(b) To do this, we need to find the second derivative of the function, which represents the curvature of the function. In this case, the second derivative is:

f''(x) = 12x² - 60

To find the intervals where the function is concave upward or concave downward, we need to find the critical points of the second derivative. Setting f''(x) = 0, we get:

12x² - 60 = 0

x = ±√5

Intervals where the function is concave upward:

(-∞, -√5) U (√5, ∞)

Intervals where the function is concave downward:

(-√5, √5)

The graph of the function is illustrated as follows.

To know more about function here

https://brainly.com/question/28193995

#SPJ4

Complete Question:

Complete parts. (a) through (c) for the following function.

x⁴-30x²+189

(a) Find intervals where the function is increasing or decreasing, and determine any relative extrema

(b) Find intervals where the function is concave upward or concave downward, and determine any infection points.

(e) Graph the function.

Therefore , the solution of the given problem of expressions comes out to be 0.872x is the equation that, in terms of x, expresses the total sum Damian paid at the register.

What does an expression signify in reality?

Shifting numbers, variable which could be expanding, decreasing, or blocking, should be used instead of random estimations. They were only able to assist one another by swapping tools, information, or fixes for problems. The statement of reality equation may include the justifications, elements, or quantitative remarks for techniques like greater dispute, fabrication, and blending.

Here,

Damian paid the following sum at the register, which is stated as follows:

=> Total price = regular price + tax.

The original price less 20% of the original price is the discounted price, which is written as follows:

=> Price after discount = x - 0.2x = 0.8x

The tax is represented as: The tax is 9% of the discounted price.

=> Tax = 0.09(0.8x) = 0.072x

Damian spent a total of x dollars at the register, hence the following phrase describes that total amount in terms of x:

Total price equals regular price plus tax.

=> Total = 0.8x+0.072x

=> Amount total = 0.872x

So, 0.872x is the equation that, in terms of x, expresses the total sum Damian paid at the register.

To know more about expressions visit :-

brainly.com/question/14083225

#SPJ1

Answer:

The answer to your problem is, 1.91

Step-by-step explanation:

In this problem:

X = [tex]\frac{3+3+4+5+7+8}{6} = 5[/tex]

6 = [tex]\sqrt{\frac{(3-5)^{2} + (3-5)^2 + (4-5)^2 + (5-5)^2 (7-5)^2 + (8-5)^2}{2} }[/tex]

= [tex]\sqrt{\frac{22}{6} }[/tex] 16 = [tex]\sqrt{\frac{(x_{1} - x )^2 + ( x_{2} - x)^2 + (x_{n} - x )^2 }{12} }[/tex]

Which will equal around:

1.19

Real value to long in decimal place.

Final answer:

The standard deviation of the data set {3,3,4,5,7,8} is approximately 1.92. This is calculated by finding the mean, computing each value's deviation from the mean, squaring those deviations, computing the mean of those squared deviations (the variance) and then taking the square root of the variance.

Explanation:

The standard deviation is a measure of how spread out the values in a data set are. To calculate it, we need to follow certain steps. Let's compute it for your given data set: {3,3,4,5,7,8}.

Calculate the mean (average) of the data set. Add all the numbers (3+3+4+5+7+8 = 30) and divide by the total number of data points (6). Mean = 30/6 = 5.Subtract the mean from each data point to get the deviation of each point. The deviations are: -2, -2, -1, 0, 2, 3Square each deviation. The squared deviations are: 4, 4, 1, 0, 4, 9.Calculate the mean of these squared deviations. This is known as the variance. Add all the squared deviations (4+4+1+0+4+9 = 22) and divide by the total number of data points. Variance = 22/6 = 3.67 (rounded to two decimal places).Finally, calculate the square root of the variance to get the standard deviation. The square root of 3.67 is approximately 1.92 (rounded to two decimal places).

Learn more about Standard Deviation here:

https://brainly.com/question/31516010

#SPJ11

Wronskian of y1 = e^{5x} and y2 = e^{−2x} is -7e^{3x}. General solution to differential equation (d²y/dx²) -10(dy/dx) + 25y = 0 is y(x) = c1e^{5x} + c2e^{-2x} on interval of (-∞, ∞).

To compute the Wronskian of the functions y1 = e^{5x} and y2 = e^{−2x}, we use the formula:

W(y1,y2) = y1*y2' - y1'*y2

where y1' and y2' denote the derivatives of y1 and y2 with respect to x, respectively.

Taking the derivatives, we have:

y1' = 5e^{5x}

y2' = -2e^{-2x}

Substituting these values into the formula, we get:

W(y1,y2) = e^{5x}*(-2e^{-2x}) - (5e^{5x})*e^{-2x}

W(y1,y2) = -2e^{3x}- 5e^{3x}

W(y1,y2) = -7e^{3x}

Therefore, the Wronskian of y1 = e^{5x }and y2 = e^{−2x} is -7e^{3x}.

To find the general solution to the differential equation (d² y)/(dx²) - 10(dy/dx) + 25y = 0, we use the fact that y1 and y2 are linearly independent solutions, and thus the general solution has the form:

y(x) = c1y1(x) + c2y2(x)

Substituting y1 and y2, we get:

y(x) = c1e^{5x} + c2e^{-2x}

This is the general solution on the entire real line (-∞, ∞).

To learn more Wronskian:

https://brainly.com/question/31483334

#SPJ11

As a result , A) 225 ml of milk and 525 ml of cream soda must therefore be combined.

B) you'll need to combine 90 ml of milk with 210 ml of cream soda.

What is the milk-to-cream soda ratio?

Cream soda and milk are combined in a 3:7 ratio. In other words, you need 7 parts of cream soda for every 3 parts of milk.

What is a ratio?

A ratio is a numerical relationship between two sums that demonstrates how frequently one value contains or is contained within the other1.

Cream soda and milk are combined in a 3:7 ratio. In other words, you need 7 parts of cream soda for every 3 parts of milk.

a) We can use the following ratio to determine how much milk to mix with 525ml of cream soda:

7 parts cream to 3 parts milk soda

525 ml of cream soda from x parts milk

By cross-multiplying, we can find x:

3 * 525 = 7 * x

x = (3 * 525) / 7

x = 225 ml

b) Using the same ratio, we can calculate how much cream soda is required to mix with 90ml of milk as follows:

7 parts cream to 3 parts milk soda

x parts cream soda to 90 ml of milk

By cross-multiplying, we can find x:

3 * x = 7 * 90

x = (7 * 90) / 3

x = 210 ml

To know more about ratio visit:

brainly.com/question/1504221

#SPJ1

learn more https://brainly.com/question/18760518

#SPJ11

The derivative is 4t^3 tan(t) + sec^2(t) t^4 - 1/2t^(1/2).

To find the derivative of s with respect to t, we can use the sum and product rules of differentiation.

s = t^4 tan(t) - √t

Taking the derivative of each term separately:

ds/dt = d/dt(t^4 tan(t)) - d/dt(√t)

Using the product rule for the first term:

d/dt(t^4 tan(t)) = (d/dt(t^4))(tan(t)) + (d/dt(tan(t)))(t^4)

Applying the chain rule for the derivative of tan(t):

d/dt(tan(t)) = sec^2(t)

Therefore,

d/dt(t^4 tan(t)) = (4t^3)(tan(t)) + (sec^2(t))(t^4)

Now, taking the derivative of the second term:

d/dt(√t) = (1/2)t^(-1/2)

Putting it all together:

ds/dt = (4t^3)(tan(t)) + (sec^2(t))(t^4) - (1/2)t^(-1/2)

So the derivative of s with respect to t is:

ds/dt = 4t^3 tan(t) + sec^2(t) t^4 - 1/2t^(1/2)

To learn more about derivative here:

https://brainly.com/question/31403488

#SPJ4

Visit here to learn more about vector : https://brainly.com/question/29740341
#SPJ11

Answer:

6k - 5

Step-by-step explanation:

8k - (5 + 2k)

A minus sign before the parentheses makes all the signs of the terms in the parentheses opposite:

8k - 5 - 2k

Collect like-terms (underlined):

6k - 5

Using surface area formula for composite figure, we can find the surface area of the rectangular prism to be = 76in².

Define composite figures?

The space that any composite shape occupies is referred to as the area of composite shapes. In order to create the desired shape, a few polygons are connected to create a composite shape. These figures or forms can be constructed using a variety of geometrical elements, including triangles, squares, quadrilaterals, and others. To determine the area of a composite object, divide it into simple shapes like a square, triangle, rectangle, or hexagon.

Here in the question,

We have 6 rectangles, and we have them equal in 3 pairs.

The 1st pair of equal rectangles have dimensions,

length, l = 5in.

breadth, b = 2in.

The 2nd pair of equal rectangles have dimensions,

length = 5in

breadth, b = 4in.

The 3rd pair of equal rectangles have dimensions,

length, l = 4in

breadth, b = 2in

Area of 1st pair of rectangles = 2 × l × b

= 2 × 5 × 2

= 20in².

Area of 2nd pair of rectangles = 2 × l × b

= 2 × 5 × 4

= 40in².

Area of 3rd pair of rectangles = 2 × l × b

= 2 × 4 × 2

= 16in².

So, total surface area of the prism = 20in² + 40in² + 16in²

= 76in².

To know more about composite figures, visit:

https://brainly.com/question/30488703

#SPJ1

Answer:

clyde needs 2/3 to bake double

Step-by-step explanation:

The step that should be considered is option B.

Dilation:

Dilation refers to a transformation, that could be used to resize the object. It is used to make the objects larger or smaller. Since the circle have a radius of 3 inches is similar to a circle with a radius of 2 feet so this means it should be dilated the smaller number by a scale factor of 8.

Learn more about radius here: brainly.com/question/5525937